Planetary Ball Mills - High-Performance all-rounders in routine laboratory work

High-speed and versatile

Planetary Mills are ideally suited for fine grinding of hard, medium-hard, soft, brittle, tough and moist materials. The comminution of the material to be ground takes place primarily through the high-energy impact of grinding balls in rotating grinding bowls.
The grinding can be performed dry, in suspension or in inert gas. In addition to comminution, you can use Planetary Mills for mixing and homogenising of emulsions and pastes or for mechanical alloying and activation in materials research.

  • High-Tech - Planetary Mills premium line
    • Extremely high-speed milling down into the nano range
    • Rotational speed of the grinding bowls up to 2200 rpm
    • Grinding has never been safer due to revolutionary new grinding bowl clamping – without additional clamping and the risk of incorrect operation.
    • Automatic check of the locks of the bowls in the mill
    • Absolutely save due to blocking of the mill in the event of impermissible operating states
    • Grinding bowls are available in different sizes with the same inner diameter for optimal transmission ratio as well as in 6 different materials to prevent undesired abrasion
    • Intelligent bowl detection via RFID chip
    • Software MillControl for automatic control of the mill and validation of the grinding process
    • 11 patents have been granted for the Planetary Mills premium line and 7 utility models are registered
  • All-Rounders - Planetary Mills classic line
    • Fast grinding to below 1 μm
    • Up to 800 rpm
    • Safe clamping of the bowls with the Safe-Lock-System
    • Simple, ergonomic handling and easy cleaning
    • Grinding bowls and balls in 7 different materials to suit all needs and avoidance of contamination through abrasion

PRODUCT FINDER

6 results
Details PULVERISETTE 5 premium line
  • Max. feed size (depends on material)
  • 10 mm
  • Max. sample quantity
  • 450 ml
  • Final fineness (depends on material)
  • < 0.1 µm
  • Main disc speed
  • 100 - 800 rpm
Details PULVERISETTE 7 premium line
  • Max. feed size (depends on material)
  • 5 mm
  • Max. sample quantity
  • 60 ml
  • Final fineness (depends on material)
  • < 0.1 µm
  • Main disc speed
  • 150 - 1100 rpm
Details PULVERISETTE 7 classic line
  • Max. feed size (depends on material)
  • 5 mm
  • Max. sample quantity
  • 40 ml
  • Final fineness (depends on material)
  • < 1 µm
  • Main disc speed
  • 100 - 800 rpm
Details PULVERISETTE 6 classic line
  • Max. feed size (depends on material)
  • 10 mm
  • Max. sample quantity
  • 225 ml
  • Final fineness (depends on material)
  • < 1 µm
  • Main disc speed
  • 100 - 650 rpm
Details PULVERISETTE 5/4 classic line
  • Max. feed size (depends on material)
  • 10 mm
  • Max. sample quantity
  • 900 ml
  • Final fineness (depends on material)
  • < 1 µm
  • Main disc speed
  • 50 - 400 rpm
Details PULVERISETTE 5/2 classic line
  • Max. feed size (depends on material)
  • 10 mm
  • Max. sample quantity
  • 450 ml
  • Final fineness (depends on material)
  • < 1 µm
  • Main disc speed
  • 50 - 400 rpm

Downloads

Product leaflet Planetary Mills premium line

for Planetary Mill PULVERISETTE 5, Planetary Micro Mill PULVERISETTE 7 premium line

Product leaflet Planetary Mills classic line

for Planetary Mill PULVERISETTE 5, Planetary Mono Mill PULVERISETTE 6, Planetary Micro Mill PULVERISETTE 7 classic line