|Optimal for material type||medium-hard, soft, fibrous samples|
|Cutting tools||rotor with straight cutting edges and fixed knives|
|Materials of the cutting tools||tool steel, stainless steel 316L, chromium-free tool steel, chromium-free steel DC01|
|Max. feed size (depending on the material and funnel)||70 x 70 mm|
|Max. throughput (depending on the material and sieve size)||50 l/h|
|Final fineness (depends on sieve insert - additional sieve sizes available)||0.25 - 20 mm|
|Rotor speed||2800/3400 rpm*|
|Rotor peripheral speed||14.92/17.9 m/s*|
|Drive||Up to 2.1 kW three-phase motor or single phase motor|
|Electrical Details/torque||400 V/3~, 50 Hz, 1790 watt, 5.5 Nm|
|Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, rotor and sieve insert used)||LpAd = 78 dB|
|Dimensions (W x D x H)||table-mounting or on stand 42 x 48 x 69 cm|
|*depending voltage and frequency|
The Cutting Mill PULVERISETTE 15 is also available in the following voltages:
|Order no.||Electrical details / Torque|
|15.4030.00||for 400 V/3~, 50 Hz, 1790 watt, 5.5 Nm|
|15.4020.00||for 200-240 V/1~, 50 Hz, 2150 watt, 4.8 Nm|
|15.4050.00||for 200 V/3~, 60 Hz, 2140 watt, 5.5 Nm|
|15.4010.00||for 100-120 V/1~, 60 Hz, 1900 watt, 3 Nm|
The PULVERISETTE 15 with voltage of “/3~” can only be operated on a three-phase supply network.
The three-phase version “/3~” is definitely preferable instead of a single-phase version “/1~”, because the three-phase version obtains more power, better effectiveness and greater energy efficiency.
Other voltages on request!