Further Jaw Crushers

 
 

FURTHER PRODUCT GROUPS

 
 

Jaw Crusher

PULVERISETTE 1

premium line

Order No.
01.2030.00
Accessories

Please note: The crushing jaws and lateral support walls of the FRITSCH Jaw Crusher PULVERISETTE 1 premium line are available in 6 different materials in order to avoid undesired contamination due to material abrasion. The standard version is equipped with fixed and movable crushing jaws as well as lateral support walls made of hardened steel.

If required, we can equip your PULVERISETTE 1 premium line with fixed and movable crushing jaws in steel with a grooved surface, which have a different influence on particle shape and particle size distribution.

Normally, crushing jaws and support walls of the same material are used. Since the lateral support walls are subject to low stresses, however, the standard lateral support walls made of tempered steel can often be retained. Fixed and movable crushing jaws made of steel with grooved surface on request.

FIXED AND MOVABLE CRUSHING JAWS and lateral support walls

Selection aid
 
  • Material data for crushing jaws and support walls

    Material Main component of the material Density g/cm³ Abrasion resistance Used for grinding material
    Hardened steel Fe – Cr 7.9 Good Brittle, hard samples
    Stainless steel Fe – Cr - Ni 8 Fairly good Medium-hard, brittle samples
    Chromium-free tool steel Fe 7.8 Good Medium-hard samples, comminution of RoHS samples such as for XRF analysis
    Manganese steel Fe - Mn 7.9-8 Good Hard, brittle samples
    Hardmetal tungsten carbide WC 14.05 Very good very hard, abrasive samples,
    Zirconium oxide ZrO2 5.7 Good Medium-hard, brittle samples, metal-free grinding
    Aluminium Al 2.7 Fairly good Brittle samples
    Polyoxymethylene POM 1.14 Fairly good Metal-free grinding

Normally, crushing jaws and support walls of the same material are used. For the comminution of RoHS samples – such as for the XRF analysis – crushing jaws and support walls made of chromium-free tool steel are particularly well suited.
For complete metal-free pre-crushing of medium-hard, brittle samples, for example in the ceramics industry, we can equip your PULVERISETTE 1 premium line with crushing jaws made of zirconium oxide, lateral support walls made of polyamide, zirconium oxide or aluminium and a special polyamide-coated funnel and drawer - other coatings available on request.

SELECT CRUSHING JAWS and support walls

FIXED AND MOVABLE CRUSHING JAWS

fixed crushing jaw, hardened steel
No. 43.3010.09
Fixed crushing jaw, hardened steel

for the comminution of brittle, very hard samples


General material specification:
Material: hardened steel - 1.2436
Abrasion resistance: good
suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.


Crushing jaws made of hardened steel belong to the standard equipment of the FRITSCH Jaw Crushers and therefore they are included in the instrument price. 


Element Analysis
General specifications
MaterialHardened steel - 1.2436
ISO/EN/DIN codeX210 CrW12
Chemical composition
ElementShare %
Iron – Feapprox. 85.5
Carbon – C2.0 – 2.3
Silicon – Si 0.1 – 0.4
Manganese – Mn 0.3 – 0.6
Phosphorus – P≤ 0.03
Sulphur – S≤ 0.03
Chromium – Cr11 – 13
Tungsten Carbide – Cr0.6 –0.8
Physical and mechanical properties
Density7.9 g/cm³
Hardness60 – 63 HRC


Explanations on hardness data
movable crushing jaw, hardened steel
No. 43.3020.09
Movable crushing jaw, hardened steel

for the comminution of brittle, hard samples


General material specification:
Material: hardened steel - 1.2436
Abrasion resistance: good
suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.


Crushing jaws made of hardened steel belong to the standard equipment of the FRITSCH Jaw Crushers and therefore they are included in the instrument price.


Element Analysis
General specifications
MaterialHardened steel - 1.2436
ISO/EN/DIN codeX210 CrW12
Chemical composition
ElementShare %
Iron – Feapprox. 85.5
Carbon – C2.0 – 2.3
Silicon – Si 0.1 – 0.4
Manganese – Mn 0.3 – 0.6
Phosphorus – P≤ 0.03
Sulphur – S≤ 0.03
Chromium – Cr11 – 13
Tungsten Carbide – Cr0.6 –0.8
Physical and mechanical properties
Density7.9 g/cm³
Hardness60 – 63 HRC


Explanations on hardness data
fixed crushing jaw, stainless steel
No. 43.3030.10
Fixed crushing jaw, stainless steel

for the comminution of medium-hard, brittle samples


General material specification:
Material: stainless steel - 1.4571
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.


Element Analysis
General specifications
MaterialStainless steel – 1.4571
ISO/EN/DIN codeX6CrNIMo Ti17-12-2
Chemical composition
ElementShare %
Iron – Fe63
Carbon – Cmax. 0.08
Silicon – Simax. 1.0
Manganese – Mnmax. 2.0
Phosphorus – Pmax. 0.045
Sulphur – S0.030
Chromium – Cr16.5 – 18.5
Molybdenum – Mo2.00 – 2.50
Nickel – Ni10.5 – 13.5
Titan – Ti 5 x C≤ 0.70
Physical and mechanical properties
Density8 g/cm³
Hardness95 HB


Explanations on hardness data
movable crushing jaw, stainless steel
No. 43.3040.10
Movable crushing jaw, stainless steel

for the comminution of medium-hard, brittle samples


General material specification:
Material: stainless steel - 1.4571
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.


Element Analysis
General specifications
MaterialStainless steel – 1.4571
ISO/EN/DIN codeX6CrNIMo Ti17-12-2
Chemical composition
ElementShare %
Iron – Fe63
Carbon – Cmax. 0.08
Silicon – Simax. 1.0
Manganese – Mnmax. 2.0
Phosphorus – Pmax. 0.045
Sulphur – S0.030
Chromium – Cr16.5 – 18.5
Molybdenum – Mo2.00 – 2.50
Nickel – Ni10.5 – 13.5
Titan – Ti 5 x C≤ 0.70
Physical and mechanical properties
Density8 g/cm³
Hardness95 HB


Explanations on hardness data
fixed crushing jaw, chromium-free tool steel
No. 43.3011.09
Fixed crushing jaw chromium-free tool steel

for the comminution of medium-hard samples


General material specifications:
Material: chromium-free tool steel  – 1.1740
Abrasion resistance: good
Suitable for: medium-hard samples
Detailed information about the material you will find in the element analysis.


For the comminution of RoHS samples – such as for the XRF analysis – crushing jaws and support walls made of chromium-free tool steel are particularly well suited.


Element Analysis
General specifications
MaterialChromium-free tool steel – 1.1740
ISO/EN/DIN codeC60W
Chemical composition
ElementShare %
Iron – Fe98.63 – 98.08
Carbon – C0.55 – 0.65
Silicon – Si0.15 – 0.4
Manganese – Mn0.6 – 0.8
Phosphorus – P0.035
Sulphur – S0.035
Physical and mechanical properties
Density7.8 g/cm³
Hardness52 - 58 HRC


Explanations on hardness data
movable crushing jaw, chromium-free tool steel
No. 43.3021.09
movable crushing jaw chromium-free tool steel

for the comminution of medium-hard samples


General material specifications:
Material: chromium-free tool steel – 1.1740
Abrasion resistance: good
Suitable for: medium-hard samples
Detailed information about the material you will find in the element analysis.


For the comminution of RoHS samples – such as for the XRF analysis – crushing jaws and support walls made of chromium-free tool steel are particularly well suited. 


Element Analysis
General specifications
MaterialChromium-free tool steel – 1.1740
ISO/EN/DIN codeC60W
Chemical composition
ElementShare %
Iron – Fe98.63 – 98.08
Carbon – C0.55 – 0.65
Silicon – Si0.15 – 0.4
Manganese – Mn0.6 – 0.8
Phosphorus – P0.035
Sulphur – S0.035
Physical and mechanical properties
Density7.8 g/cm³
Hardness52 - 58 HRC


Explanations on hardness data
fixed crushing jaw, manganese steel
No. 43.3130.23
Fixed crushing jaw, manganese steel

for the comminution of hard, brittle samples


General material specifications:
Material: manganese steel - 1.3401
Abrasion resistance: good
Suitable for: hard, brittle samples
Detailed information about the material you will find in the element analysis.


Element Analysis
General specifications
MaterialManganese steel – 1.3401
ISO/EN/DIN codeX120Mn12
Chemical composition
ElementShare %
Iron – Fe83.56 -85.96
Chromium – Cr < 1,50
Silicon – Si0,3–0,5
Manganese – Mn12,0–13.0
Carbon – C1.1 -1.3
Phosphorus – P< 0.1
Sulphur – S< 0.04
Physical and mechanical properties
Density7.9–8 g/cm³
Hardness27–32 HRC


Explanations on hardness data
movable crushing jaw, manganese steel
No. 43.3140.23
Movable crushing jaw, manganese steel

for the comminution of hard, brittle samples


General material specifications:
Material: manganese steel - 1.3401
Abrasion resistance: good
Suitable for: hard, brittle samples
Detailed information about the material you will find in the element analysis.


Element Analysis
General specifications
MaterialManganese steel – 1.3401
ISO/EN/DIN codeX120Mn12
Chemical composition
ElementShare %
Iron – Fe83.56 -85.96
Chromium – Cr < 1,50
Silicon – Si0,3–0,5
Manganese – Mn12,0–13.0
Carbon – C1.1 -1.3
Phosphorus – P< 0.1
Sulphur – S< 0.04
Physical and mechanical properties
Density7.9–8 g/cm³
Hardness27–32 HRC


Explanations on hardness data
fixed crushing jaw, hardmetal tungsten carbide
No. 43.3050.08
Fixed crushing jaw, hardmetal tungsten carbide

for the comminution of hard, abrasive samples


General material specifications:
Material: Hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: very hard, abrasive samples
Detailed information about the material you will find in the element analysis.


Element Analysis
General specifications
MaterialTungsten carbide - WC
ISO/EN/DIN code
Chemical composition
ElementShare %
Tungsten carbide – TC85.00
Cobalt – Co15.00
Physical and mechanical properties
Density14.05 g/cm³
Hardness1020 HV10


Explanations on hardness data
movable crushing jaw, hardmetal tungsten carbide
No. 43.3060.08
Movable crushing jaw, hardmetal tungsten carbide

for the comminution of very hard, abrasive samples


General material specifications:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for very hard, abrasive samples
Detailed information about the material you will find in the element analysis.


Element Analysis
General specifications
MaterialTungsten carbide - WC
ISO/EN/DIN code
Chemical composition
ElementShare %
Tungsten carbide – TC85.00
Cobalt – Co15.00
Physical and mechanical properties
Density14.05 g/cm³
Hardness1020 HV10


Explanations on hardness data
fixed crushing jaw, zirconium oxide
No. 43.3100.27
Fixed crushing jaw, zirconium oxide

for the comminution of medium-hard, brittle samples and metal-free crushing


General material specifications:
Material: zirconium oxide - ZrO2
Abrasion resistance: good
Suitable for: medium-hard, brittle samples, metal-free crushing
Detailed information about the material you will find in the element analysis.


Metal-free pre-crushing
For absolute protection against metal contamination, such as for dental ceramics. Crushing jaws made of zirconium oxide are perfect for completely metal-free pre-crushing of medium-hard brittle samples, for example in the ceramics industry, we can equip your FRITSCH Jaw Crusher PULVERISETTE 1 premium line and classic line with lateral support walls made of:


aluminium:
order no. 43.4040.13 – model premium line
order no. 43.3150.13 – model classic line


zirconium oxide:
order no. 43.4050.27 – model premium line
order no. 43.3160.27 – model classic line


polyamide:
order no. 43.4045.16 – model premium line


Element Analysis
General specifications
MaterialZirconium oxide - ZrO2
Chemical composition
ElementShare %
Zirconium oxide – ZrO294.2 - 95.2
Hafnium oxide – HfO21 - 2
Magnesium oxide – MgO3.5
Silicon dioxide – SiO20.1
Aluminium oxide – Al2O30.1
Other0.1
Physical and mechanical properties
Density5.7 g/cm³
Hardness Vickers 1200 (HV10)


Explanations on hardness data
movable crushing jaw, zirconium oxide
No. 43.3110.27
Movable crushing jaw, zirconium oxide

for the comminution of medium-hard, brittle samples and metal-free grinding


General material specification:
Material: zirconium oxide - ZrO2
Abrasion resistance: good
Suitable for: abrasive, medium-hard, brittle samples, metal-free crushing
Detailed information about the material you will find in the element analysis. 


Metal-free pre-crushing
For absolute protection against metal contamination, such as for dental ceramics. Crushing jaws made of zirconium oxide are perfect for completely metal-free pre-crushing of medium-hard brittle samples, for example in the ceramics industry, we can equip your FRITSCH Jaw Crusher PULVERISETTE 1 premium line and classic line with lateral support walls made of:


aluminium:
order no. 43.4040.13 – model premium line
order no. 43.3150.13 – model classic line


zirconium oxide:
order no. 43.4050.27 – model premium line
order no. 43.3160.27 – model classic line


polyamide:
order no. 43.4045.16 – model premium line


Element Analysis
General specifications
MaterialZirconium oxide - ZrO2
Chemical composition
ElementShare %
Zirconium oxide – ZrO294.2 - 95.2
Hafnium oxide – HfO21 - 2
Magnesium oxide – MgO3.5
Silicon dioxide – SiO20.1
Aluminium oxide – Al2O30.1
Other0.1
Physical and mechanical properties
Density5.7 g/cm³
Hardness Vickers 1200 (HV10)


Explanations on hardness data

Lateral Support Walls

1 pair made of hardened steel
No. 43.4000.09
1 pair of lateral support walls, hardened steel

For the comminution of brittle, hard samples.


General material specifications:
Material: hardened steel - 1.2436
Abrasion resistance: good
Suitable for: brittle, hard samples
Detailed information about the material you will find in the element analysis.


Element Analysis
General specifications
MaterialHardened steel - 1.2436
ISO/EN/DIN codeX210 CrW12
Chemical composition
ElementShare %
Iron – Feapprox. 85.5
Carbon – C2.0 – 2.3
Silicon – Si 0.1 – 0.4
Manganese – Mn 0.3 – 0.6
Phosphorus – P≤ 0.03
Sulphur – S≤ 0.03
Chromium – Cr11 – 13
Tungsten Carbide – Cr0.6 –0.8
Physical and mechanical properties
Density7.9 g/cm³
Hardness60 – 63 HRC


Explanations on hardness data
1 pair made of stainless steel
No. 43.4020.10
1 pair of lateral support walls, stainless steel

For the comminution of medium-hard, brittle samples.


General material specification:
Material: stainless steel - 1.4571
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.


Element Analysis
General specifications
MaterialStainless steel – 1.4571
ISO/EN/DIN codeX6CrNIMo Ti17-12-2
Chemical composition
ElementShare %
Iron – Fe63
Carbon – Cmax. 0.08
Silicon – Simax. 1.0
Manganese – Mnmax. 2.0
Phosphorus – Pmax. 0.045
Sulphur – S0.030
Chromium – Cr16.5 – 18.5
Molybdenum – Mo2.00 – 2.50
Nickel – Ni10.5 – 13.5
Titan – Ti 5 x C≤ 0.70
Physical and mechanical properties
Density8 g/cm³
Hardness95 HB


Explanations on hardness data
1 pair made of chromium-free tool steel
No. 43.4010.09
1 pair of lateral support walls chromium-free tool steel

For the comminution of medium-hard samples.


General material specification:
Material: chromium-free tool steel -  1.1740
Abrasion resistance: good
Suitable for: medium-hard samples
Detailed information about the materials you will find in the element analysis.


For the comminution of RoHS samples – such as for the XRF analysis – crushing jaws made of chromium-free tool steel and support walls made of chromium-free steel are particularly well suited.


Element Analysis
General specifications
MaterialChromium-free tool steel – 1.1740
ISO/EN/DIN codeC60W
Chemical composition
ElementShare %
Iron – Fe98.63 – 98.08
Carbon – C0.55 – 0.65
Silicon – Si0.15 – 0.4
Manganese – Mn0.6 – 0.8
Phosphorus – P0.035
Sulphur – S0.035
Physical and mechanical properties
Density7.8 g/cm³
Hardness52 - 58 HRC


Explanations on hardness data
1 pair made of hardmetal tungsten carbide
No. 43.4030.08
1 pair of lateral support walls, hardmetal tungsten carbide

For the comminution of very hard, abrasive samples.


General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: extremely good
Suitable for: very hard, abrasive samples
Detailed information about the material you will find in the element analysis.


Element Analysis
General specifications
MaterialTungsten carbide - WC
ISO/EN/DIN code
Chemical composition
ElementShare %
Tungsten carbide – TC85.00
Cobalt – Co15.00
Physical and mechanical properties
Density14.05 g/cm³
Hardness1020 HV10


Explanations on hardness data
1 pair made of aluminium
No. 43.4040.13
1 pair of lateral support walls, made of aluminium

For the comminution of brittle samples, metal-free grinding.


General material specification:
Material: aluminum - 3.4365
Abrasion resistance: fairly good
Suitable for: brittle samples, metal-free grinding
Detailed information about the materials you will find in the element analysis.


Element Analysis
General specifications
MaterialAluminium AlZnMgCu1,5
ISO/EN/DIN Code3.4365
Chemical composition
ElementShare %
Iron – Fe0.50
Silicon – Si0.40
Copper – Cu1.20 - 2.0
Manganese – Mn0.30
Magnesium – Mg2.1 - 2.9
Chromium – Cr0.18 - 0.28
Zinc – ZN5.1 - 6.1
Titan – Ti0.20
Physical and mechanical properties
Density2,7 g/cm³
Hardness2,75 Mohs


Explanations on hardness data
1 pair made of zirconium oxide
No. 43.4050.27
1 pair of lateral support walls, zirconium oxide

For the comminution of medium-hard, brittle samples, metal-free grinding.


General material specification:
Material: zirconium oxide - ZrO2
Abrasion resistance: good
Suitable for: medium-hard, brittle samples, metal-free grinding


Detailed information about the material you will find in the element analysis.


Lateral support walls of zirconium oxide are only suitable for crushing ceramic materials, minerals etc. and never for hard-tough samples such as metals. 


Element Analysis
General specifications
MaterialZirconium oxide - ZrO2
Chemical composition
ElementShare %
Zirconium oxide – ZrO294.2 - 95.2
Hafnium oxide – HfO21 - 2
Magnesium oxide – MgO3.5
Silicon dioxide – SiO20.1
Aluminium oxide – Al2O30.1
Other0.1
Physical and mechanical properties
Density5.7 g/cm³
Hardness Vickers 1200 (HV10)


Explanations on hardness data
1 pair made of POM plastic
No. 43.4045.16
1 pair of lateral support walls, POM plastic

For complete metal-free pre-crushing.


General material specification:
Material: Polyoxymethylene - POM
Abrasion resistance: fairly good
Suitable for: complete metal-free pre-crushing


Element Analysis
General specifications
MaterialPOM Polyoxymethylene
ISO/EN/DIN CodeDIN 7728 C9021
Chemical composition
ElementFormula
Polyoxmethylenecopolymer (Polyacetale)CxH2xOx
Melting point165° C
max. Application temp. constant90°
max. Application temp. briefly140°
Chemical Resistance
Aliphatical hydrocarbon
Aromatical hydrocarbon
Halogenised hydrocarbon
weak acid
strong alkaline solution
Physical and mechanical properties
Density141,g /cm³
Hardnessextremely hard

Accessories for metal-free pre-crushing

Conversion kit for metal-free pre-crushing, ideal for complete metal-free pre-crushing of brittle samples, for example in the ceramics industry.
Consisting of funnel and drawer, both polyamide-coated - other coatings available on request.

Select Accessories for metal-free pre-crushing

Accessories for metal-free pre-crushing

conversion kit for metal-free pre-crushing
No. 01.2090.00

Conversion kit for metal-free pre-crushing, ideal for complete metal-free pre-crushing of brittle samples, for example in the ceramics industry. Consisting of funnel and drawer, both polyamide-coated - other coatings available on request.


For this, fixed and movable crushing jaws made of zirconium oxide* and lateral support walls made of POM plastic or zirconium oxide* are additionally necessary:


fixed crushing jaw
zirconium oxide*- order no. - 43.3100.27


movable crushing jaw
zirconium oxide* - order no. -  43.3110.27
 
lateral support walls 
POM plastic          - order no. -  43.4045.16
zirconium oxide*- order no. -  43.4050.27


*Please note: Crushing jaws and lateral support walls made of zirconium oxide* are only suitable for crushing ceramic materials, minerals etc. and never for hard-tough samples such as metals.


Certification

IQ/OQ documentation for the independent utilization for the support of instrument qualification in the quality management system for the Jaw Crusher PULVERISETTE 1 premium line.

Please select the certification

Certification

IQ/OQ documentation (questionnaire format - implementation not included)
No. 96.0340.00
IQ/OQ documentation (questionnaire format - implementation by customer)

IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the Jaw Crusher PULVERISETTE 1 premium line.


Dust exhaust system

We offer the perfect dust exhaust and accessories with integrated channels for dust-free operation, simply connect the dust exhaust system and control it directly using the start and stop button on the instrument. The button lights up in green when the dust exhaust system is ready for operation.

Select Dust exhaust system and accessories

Dust exhaust system

dust exhaust system, dust category „M” according to DIN EN 60335-2-69
No. 43.9070.00
Exhaust system, dust category "M" according to DIN EN 60335-2-69

The exhaust system, dust category "M" according to DIN EN 60335-2-69 for 230 V/1~, 50/60 Hz, 1000 Watt is versatile:


For combination with the high performance and small volume cyclones.
To operate the FRITSCH Cyclones you need an exhaust system. The strong airflow ensures simple feeding, increases throughput, and reduces the thermal load of the samples. The high performance and small volume Cyclone separator can be combined with Universal-Cutting Mill PULVERISETTE 19, the Variable Speed Rotor Mill PULVERISETTE premium line and classic line even passive – without sample exhaust.


For cooling of the Variable Speed Rotor Mill PULVERISETTE 14 premium line
By connecting the exhaust system to the PULVERISETTE 14 premium line, the cooling of the mill can easily be enhanced.


For combination with the Jaw Crusher PULVERISETTE 1 premium line
The exhaust system is simply connected and operated via a start and stop button on the instrument – perfect dust exhaust due to integrated dust exhaust channels for dust free operation.


For connecting to Disk Mill PULVERISETTE 13 premium line
The exhaust system with the optional connecting piece for dust exhaust system order no. 13.3250.00, can be connected to the PULVERISETTE 13 premium line and operated via a start and stop button on the instrument – for dust free comminution.


For connecting to the Jaw Crusher PULVERISETTE 1, Modell I + II classic line
Simply connect the exhaust system to the integrated connection of the PULVERISETTE 1. Fine dust arising during comminution is automatically removed. The exhaust system is also very useful when cleaning the grinding parts.


For connecting to the Disk Mill PULVERISETTE 13 classic line
Optionally, the exhaust system can be combined with the connecting piece order no. 13.1450.00, to the PULVERISETTE 13 classic line. Fine dust arising during comminution is automatically removed. The exhaust system is also very useful when cleaning the grinding parts.


For vacuuming the sample material during dry measurements
The exhaust system is necessary to vacuum the sample material during measurements with the Dry Dispersion Unit and Falling Chute of the Laser Particle Sizer ANALYSETTE 22 NanoTec. Please keep in mind though, that this exhaust system does not contain a fine dust filter and therefore fine dust may escape. Please consider the valid occupational health and safety regulations. For dry measuring with the Laser Particle Sizer an exhaust system with fine dust filter is offered, please refer to order no. 43.9060.00.


fleece filter bag for exhaust system (pack = 5 pieces)
No. 43.9055.00

1 pack = 5 pieces
One pack is included in the scope of delivery of the exhaust system (article No. 43.9070.00).
These fleece filter bags should be used for the vacuuming off of fine, dry materials.
For the vacuuming off of coarse, wet materials are plastic bags available (article no. 43.9052.00).


plastic bag for exhaust system (pack = 5 pieces)
No. 43.9052.00

1 pack = 5 pieces

One pack is included in the order of the exhaust system (article No. 43.9070.00).
These plastic bags should be used for the vacuuming off of coarse, wet materials.
For the vacuuming off of fine, dry materials are paper filter bags available (article no. 43.9055.00).


Accessories for continuous operation

For especially fast continuous premium pre- and fine-grinding of large quantities of coarse material, the combination of the Jaw Crusher PULVERISETTE 1 premium line and the Disk Mill PULVERISETTE 13 premium line is the solution: they form an efficient, heavy-duty, high-performance grinding instrument with integrated Riffle Sample Splitter. This gives you the full range of opportunities for sample preparation with a feed size of up to 95 mm and final fineness of down to 0.05 mm.
The combined FRITSCH premium high-performance grinding instrument can also be configured for completely metal-free pre- and fine-grinding.

Select accessories for continuous operation

Accessories for continuous operation

mounting rack with integrated Riffle Sample Splitter for combined use of Jaw Crusher PULVERISETTE 1 with the Disk Mill PULVERISETTE 13
No. 43.6000.00
Mounting rack with integrated Riffle Sample Splitter for combined use of Jaw Crusher PULVERISETTE 1 with the Disk Mill PULVERISETTE 13

For especially fast continuous premium pre- and fine-grinding of large quantities of coarse material, the combination of the Jaw Crusher PULVERISETTE 1 premium line and the Disk Mill PULVERISETTE 13 premium line is the ideal solution. Together, they form an efficient, heavy-duty, high-performance grinding instrument with integrated Riffle Sample Splitter.
Giving you the full range of opportunities for optimal sample preparation with a feed size of up to 95 mm and final fineness of down to 0.05 mm.
Integrated representative sample division
After the comminution in the Jaw Crusher PULVERISETTE 1 premium line, the ground material falls directly into the Riffle Sample Splitter integrated in the collecting vessel and is automatically divided into representative samples. The division ratio can be set as desired, from 1:1 to 1:6.
Continuous Operation
Conversion kit for continuous operation of the Jaw Crusher PULVERISETTE 1 premium line  and the Disk Mill PULVERISETTE 13 premium line on request.
Select the appropriate grinding parts and the desired configuration from the options available from our accessory pages  for the:  


Jaw Crusher PULVERISETTE 1 premium line


Disk Mill PULVERISETTE 13 premium line


Order No.
01.2030.00
Janine Allkofer
FRITSCH GmbH - Milling and Sizing
Industriestrasse 8
55743 Idar-Oberstein
Phone +49 67 84 70 0

Grinding report database

Test now

Individual sample grinding

Send us your sample. We conduct a sample grinding and recommend the right device for your application.