MENU - PARTNER AREA

Wheat (Triticum)

Protocol number:	M100342
Industry:	Biology, Agriculture and forestry, Foodstuffs
Feed Size:	< 6 mm
Desired Fineness:	< 0,5 mm
Quantity:	500 g
Recommendation:	For a grinding of the desired amount of sample, we recommend using a Variable Speed Rotor Mill PULVERISETTE 14 in combination with the optional sample exhauster system with cyclone separator.

Result 1

	Variable Speed Rotor Mill PULVERISETTE 14 classic line rotor speed: 20.000 rpm
Equipment:	Rotor with 12 ribs made of stainless steel + sieve ring 0,5 mm with trapezoidal perforation + Vibratory-feeder LABORETTE 24 + Sample exhauster with cyclone separator
Feed quantity:	500 g
Feed Size:	< 6 mm
Grinding time:	1:45 min
Final fineness:	< 500 µm
Comments:	A maximum feed rate of ~ 17kg/h is possible for a grinding of this sample. After grinding, the temperature of the rotor (warmest spot) was < 30°C in our trial. Sieve ring and rotor are clean. Only a small amount of sample is sticking electrostatic charged to the collecting pan. Higher amounts are grindable. Cleaning has been performed rapidly by vacuuming with a soft brush. For intensive cleaning, all parts can be dissembled without using tools and washed with warm and soapy water.