|Biology, Agriculture and forestry|
|< 3 cm|
|< 250 µm|
|We recommend a cutting mill like Universal Cutting Mill PULVERISETTE 19 for comminution.|
standard rotor with V-cutting edges and fixed knives made of tool steel
+ sieve cassette: 0,25 mm trapezoidal perforation
||< 3 cm|
||< 250 µm|
To prevent a blockage of the openings of such a fine sieve cassette, sample had been fed slowly. After 30 minutes of grinding, the complete sample had been comminuted successfully. Inside the grinding chamber, only a bit of (mainly electrostatic charged) sample dust use to be remain. Cleaning can be performed rapidly by vacuuming with a soft brush.
If a daily grinding should be performed, we would recommend using the optional sample exhauster system with cyclone separator. A previous sample grinding has shown an output of up to 3 kg/h while this trial has been done with only 1 kg/h.
Also less dust will escape the feeding funnel or collecting vessel because of the high airflow of 2800 L/min.