Variable rotational speed for optimal adjustment of the cutting speed to your sample material
The NEW Universal Cutting Mills from FRITSCH are ideal for size-reduction for a wide range of different materials due to variable adjustment of the rotational speed of the rotor, various knife geometries, replaceable blades, practical sieve cassettes and that with an unmatched ease of cleaning.
Variable 300-3000 rpm for fine comminution
The high-speed Universal Cutting Mill PULVERISETTE 19 comminutes up to 60 l/h of soft to medium-hard sample materials and fibrous materials at a torque of up to 30 Nm with reliable reproducible results. The great advantage: The variable rotational speed adjustment in increments of hundred between 300 and 3000 rpm enables fine tuning of the comminution process for each sample within a very wide range of applications.
DETAILED INFORMATION oN THE new PULVERISETTE 19 WITH 300-3000 rpm
Variable 50-700 rpm for powerful comminution
The low-speed Universal Cutting Mill PULVERISETTE 19 with variable rotational speed adjustment between 50-700 rpm and a torque of up to 67 Nm enables due to the combination of low cutting rate and extreme cutting forces a very powerful comminution of hard, tough-elastic samples and small sample quantities. At the same time, it is the ideal solution for all cases where e.g. thermal damage, the loss of highly volatile substances, or an excessively high fine share need to be avoided.
detailed information on the NEW PULVERISETTE 19 with 50-700 rpm
Place the FRITSCH Universal Cutting Mills in your laboratory via the NEW AR-App
You want to see the Universal Cutting Mill in your own laboratory? No Problem! Simply download the free-of-charge AR-App in the app store of your mobile device and discover the many functions of NEW Cutting Mills.
for Universal Cutting Mill PULVERISETTE 19, Cutting Mill PULVERISETTE 15, Power Cutting Mill PULVERISETTE 25, Cutting Mill Combination PULVERISETTE 25/PULVERISETTE 19