MENU - PARTNER AREA

Silacron (Quarz acrylic compound)

Protocol number:	M0098065
Industry:	Chemistry, Geology / mineralogy, Ceramics / glass industry
Feed Size:	< 6 cm
Desired Fineness:	10 mm
Quantity:	1 kg
Recommendation:	The sample use to be brittle enough for a grinding with our Jaw Crusher PULVERISETTE 1 Model I

Result 1

	Jaw Crusher PULVERISETTE 1 classic line Model I gap position: 2.0
Equipment:	crushing jaws made of tempered steel
Feed quantity:	1.15 kg
Feed Size:	< 6 cm
Grinding time:	10 min
Final fineness:	< 10 mm
Comments:	With Model I, up to 60 mm long pieces can be fed. In case of bigger pieces, we recommend using the Model II where up to 95 mm pieces can be fed. The complete sample has been ground with a gap position 2.0. With this gap position, the desired fineness of particles < 10 mm has been reached. After 10 minutes, the grinding chamber has been emptied; all sample has been ground. The dusty grinding chamber became cleaned rapidly by vacuuming with a soft brush. Even higher amounts of sample can be ground this way.