Cuprous Chloride

*1: each 30min of grinding, we added further 10ml of Toluene.

*2: see our particle size analysis after 4h with ANALYSETTE 22 NanoTec,on Meas.No 7429.

After 30min of grinding, d50 < 9,6µm and d90 < 17,6µm -Meas.No. 7396

Also find the particle size analysis of the original sample (d50 <41,3µm and d90 <73,0µm) on Meas.No. 7390 as well.

*1: each 30min of grinding, we added further 10ml of Toluene.

*2: see our partice size analysis after 4h with ANALYSETTE 22 NanoTec,on Meas.No 7428.

After 30min of grinding, d50 < 10µm and d90 < 19,1µm -Meas.No. 7397

*1: each 30min of grinding, we added further 10ml of Toluene.

*2: see our partice size analysis after 1h with ANALYSETTE 22 NanoTec,on Meas.No 7434.

After 30min of grinding, d50 < 6,1µm and d90 < 11,9µm -Meas.No. 7432

It is not possible to grind your sample of Copper chloride (CuCl) within a few hours by using A PULVERISETTE 7 premium line with zirconium oxide grinding set to achieve a fineness < 1µm.